@all,
i just received today for service three early swb green face tachometers.
On further inspection i did notice, that the face of the 64 tacho is different than the 65.
I compared with the 65 gauges I do have, but unfortunately do not have a further 64 unit to compare.
Furtheron I noticed, that the part number is complete different from the ones I had.
The difference is to be seen in the turnsignal cut outs.
On the 64 unit the left cut out is directly above the digit 4, the right cut out starts directly over the digit 5.
On the 65 units - I have four to crosscheck - the left cut is at the left side of the digit 4 and the right cut out ends at the right side of the digit 5.
the part number of the 64 is like the 65
901 741 302 01
but, instead the standard 0004,
0001 and 1016/18/1
any clue on this issue?
any further 64 units in the field to compare?
with best regards
haul
i just received today for service three early swb green face tachometers.
On further inspection i did notice, that the face of the 64 tacho is different than the 65.
I compared with the 65 gauges I do have, but unfortunately do not have a further 64 unit to compare.
Furtheron I noticed, that the part number is complete different from the ones I had.
The difference is to be seen in the turnsignal cut outs.
On the 64 unit the left cut out is directly above the digit 4, the right cut out starts directly over the digit 5.
On the 65 units - I have four to crosscheck - the left cut is at the left side of the digit 4 and the right cut out ends at the right side of the digit 5.
the part number of the 64 is like the 65
901 741 302 01
but, instead the standard 0004,
0001 and 1016/18/1
any clue on this issue?
any further 64 units in the field to compare?
with best regards
haul
Comment